Beautiful, Elegant and Highly Effective Security Control

Jetpan Speed Gates

Jetpan Speed Gates from TiSO are a tall, efficient and secure access control speed lane system. They are easy to operate. They integrate into a building’s overall security arrangements especially when a higher degree of protection is required to prevent people hurdling.

TiSO Jetpan Speed Gates Overview

Exceptional access control automation from ACE Facilities

Our Jetpan speed gates provide fast, efficient and reliable control of your building’s entrances’ without compromising on security. Available in different lane width options to suit any access control application, including DDA compatibility with wheelchair access.

Introduction to Jetpan Speed Gates

Security Made Easier

The TiSO Jetpan speed gates operate on the sliding panels principle and at 1522mm high, they are designed to prevent people hurdling them or passing items easily over it.

The Jetpan speed gates barrier wings as standard are manufactured from safety tempered glass, however they are also available with polycarbonate barrier wings options.

A strong, well built, reliable security speed gate that can be configured to either a normally open or closed operation.

Normally Closed – The most common way of configuration. The glass panels are always in the closed position. They will only open when the signal to do so is given by the access control system (see options below) or manual override.
Normally Open – The glass panels are always in the open position, and only close when a person is detected entering the turnstile that has not presented an acceptable form of ID to the access control, or has failed a detection test, for example: body temperature or facial recognition with/without a mask etc.

Jetpan speed gates can be integrated with any type of access control system.

A choice of additional devices can be integrated within the Sweeper housing including for example; RFID / Proximity or BioMetric readers, coin acceptors, push button, barcode and QR-code readers, passage counters.

Of course since the out break of the COVID-19 pandemic, the TiSO Jetpan range of speed gates are now available with automated body temperature testing and/or facial recognition to detect those with or without a face mask.

Features of the Jetpan Speed Gates

Let’s make life safer

high traffic flow capacity – 30 persons per minute
equipped with sensors that allow to detect tailgating
modern contemporary design to blend in any surroundings
wide lane configuration for disabled and trolley access
robust case construction, suitable for high traffic areas
glass barrier panels and side infills produce a light transparent effect
customisable surface and top finishes to achieve your desired design
we can integrate these speed gates with any type of access control
Low power consumption
Low noise system operation
Can be mounted on a mobile platform (TiSO Frame-M)

The entire TiSO speed gate and turnstile model range are configurable to be controlled in either, an automatic, or manual mode.

In the automatic mode, the glass panels are opened/closed determined by the signal from an access control system such as a proximity ID card, key fob, biometric reader, facial recognition, body temperature detection control etc
In the manual mode, the glass panels are opened/closed according to the manual command given from a control panel often positioned at a reception desk or a remote position perhaps from being CCTV monitored.

Downloads and Specifications

ACE Facilities Ltd are experienced expert installers partners of the TiSO brand of turnstiles and speed gate products.

The Jetpan is part of the TiSO family of speed gates and you can learn more about the range on this website.

Furthermore, you can download the catalogue here.

Download the catalogue

Specifications

Configuration	Jetpan Speed Gates	Jetpan 900 Speed Gates
Crossing capacity in single access mode	30 person/min	18 person/min
Opening / closing time	1 second	2.2 seconds
Passage width, mm	500	900
Overall height	1522 mm	1522 mm
Mechanism	Servodrive	Servodrive
Tailgating function	Yes	Yes
Blocking mechanism	Electromagnetic brake	Electromagnetic brake
Emergency mode	Free entry/exit (gates are opened automatically	Free entry/exit (gates are opened automatically
Power failure	Fail safe (gates can be opened manually)	Fail safe (gates can be opened manually)
Standard housing	Brushed SS AISI 304	Brushed SS AISI 304
Available housing	Brushed SS AISI 316 / Polished SS AISI 304 / Polished SS AISI 316 / Powder coated (any RAL up on request)	Brushed SS AISI 316 / Polished SS AISI 304 / Polished SS AISI 316 / Powder coated (any RAL up on request)
Top lid Options	Stainless steel top (with glass inserts) Solid glass top	Stainless steel top (with glass inserts) Solid glass top
Voltage	AC (100-240)V, 50/60Hz DC source 12 V	AC (100-240)V, 50/60Hz DC source 12 V
Maximum power consumption	155 Watts	155 Watts
Enclosure rating	IP41	IP41
MCBF, cycles	1 500 000	1 500 000

Disclaimer

The product design specifications including dimensions published on this website are subject to change without notice as part of an ongoing development programme. To avoid doubt, please always check the specifications with us prior to placing an order.